This program combines as many movie files together as are given to it on the command line.

This program also supports several options:
	-t
		Turn on "three-two pulldown" mode.

	-p
		Turn on "pal to film" mode.

	-n
		Turn off -t and -p.

	-d
		Apply a time offset.
		Time offset must be in the format hh:mm:ss.mmm
		Do not omit any leading or trailing zeroes.

Example -  Combining "file1.txt", "file2.txt", and "file3.txt" in "three-two pulldown" mode and writing the output to "output.txt"
MovieChapterCombiner -t file1.txt file2.txt file3.txt >> output.txt

A more complicated example - if you wanted to combine movie files "file1.txt", "file2.txt", "file3.txt", and "file4".txt together, and you wanted "file2.txt" to be processed in "pal to film" mode and "file3.txt" and "file4.txt" to be processed in "three-two pulldown" mode and you wanted a delay of three minutes between "file1.txt" and "file2.txt" and you wanted a delay of 5 minutes between "file3.txt" and "file4.txt" and you wanted the output to go to "NewChapters.txt" you would use the following command line:

MovieChapterCombiner file1.txt -p -d=00:03:00.000 file2.txt -n -t file3.txt -d=00:05:00.000 file4.txt >> NewChapters.txt

*note that -p and -t are off by default and once an option is turned on it affects all subsequent files. In this example we did not want to apply -p to "file3.txt" or "file4.txt" so -n was used to turn off that option.


